Manufacturing Engineering Intern

Los Osos, CA
Internship
Manufacturing
Entry Level

Rantec Power Systems Inc. is hiring an in-person Manufacturing Engineering Intern! Rantec is located in Los Osos, California is an upper-tier designer and manufacturer of power supplies for the military and aerospace markets. We are an engineering-based company, with expertise in all aspects of power supply design, manufacturing and test.

Scope
Manufacturing Engineering Intern will work within production space to contribute and learn. Gain valuable hands-on experience while being a part of a team that foster’s innovation, employee involvement.   Perform task related to electronic assembly, tooling design, assembly instruction, and document updates of power supply development for defense and aerospace applications.  This position will work alongside Manufacturing and Process Engineers as they encounter challenges.  During the Summer period a project will be assigned which improves product on time delivery, reduced production cost, and eliminate defects.

Essential Duties and Responsibilities

  • Support assembly documentation by updating standard work that includes descriptions and photos.
  • Update product routes within Rantec’s ERP system.
  • Value stream mapping of production processes and product to eliminate waste.
  • Contribute to manufacturing team to solve problems that reduce defects and cost.
  • Design and document manufacturing fixtures using SolidWorks or AutoCAD.
  • Solve a variety of production problem daily.
  • Testing new materials through various manufacturing processes and reporting on findings.
  • Create reports using various data from our MRP system; analyze trends.
  • Create fixturing tools for use by assemblers and suppliers.
  • Repair/refurbishment of worn assembly tools.
  • Provide feedback on current manufacturing methods.
  • Support updates on training materials.
  • Support product improvement through the analysis of existing products and the incorporation of process improvements.
  • Incorporate product changes originating from changes in manufacturing requirements, and to address issues.
  • Participate in design reviews, scheduling meetings and other engineering work groups as needed.
  • Ability to work flexible hours and/or different shifts, as required.
  • Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA, EPA, State and Federal Regulations.
  • As the Company’s success relies on the productivity of our team and adherence to customer product schedules, an essential function of this position is the ability to arrive to work on-time, and work each day, as scheduled.
  • Perform other duties as assigned.
Qualification Requirements:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This position requires access to our export-controlled commodities, technical data, technology and services.  These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens, Lawful Permanent Residents of the U.S. and properly licensed foreign persons.  Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S. Department of Commerce’s Bureau of Industry and Security, U.S. Department of State’s Office of Defense Trade Controls, or other applicable government agency.

Education and Experience
  • Interest in electronics manufacturing
  • 1 year of previous manufacturing experience preferred
  • Experience with Microsoft word, excel, power point
  • Pursuing degree related to Manufacturing or Industrial Engineering (IME, ME, IE, GE)
  • Ability to manage time and tasks
  • Able to communicate clearly to document instructions of processes
  • Good technical writing skills
  • Able to effectively take photos
  • Good organization skills with superb attention to detail
  • Ability to analyze drawings, written procedures, and processes to find the best method of achieving desired results
  • Ability to design basic MFG tooling using SolidWorks or AutoCAD software
  • Knowledge of ERP & MRP software
  • Excellent interpersonal as well as verbal and written communication skills
  • 3.0 or higher GPA
Physical Requirements
The physical demands described here are representative of those to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Work within a factory environment, including moderate noise and chemical odors
  • Moving between sitting, standing, and walking
  • Consistently lifting and handling up to 10 pounds and periodically lifting up to 25 pounds.
  • Specific vision abilities required by this job close vision, distance vision, peripheral vision, depth perception and the ability to focus, with correction.

Rantec is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or status as a protected veteran. Rantec will consider reasonable accommodation to its policies for employees and applicants due to sincerely held religious belief.
       

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 05/31/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*